BDGCP - TT-E-50B FF WHITE #27778
- MSDS: BDGCP
- Manufacturer: ATLAS PAINT AND VARNISH CO
- Product Name: TT-E-50B FF WHITE #27778
- National Stock Number: 8010-00-180-6274
Product Identification
Product ID:TT-E-50B FF WHITE #27778
MSDS Date:01/01/1985
FSC:8010
NIIN:00-180-6274
MSDS Number: BDGCP
Responsible Party
Emergency Phone: 261-373-3300
Cage: KO008
Contractor
Cage: 84239
Ingredients
TITRIUM DIOXIDE
Fraction By Weight: 46%
ACGIH TLV: 15MC-M3
VEHICLE
Fraction By Weight: 26%
NAPHTHA (PETROLEUM SPIRITS OR BENZIN)
CAS: 8030-30-6
RTECS: SE7555000
Fraction By Weight: 27%
OSHA PEL 100 PPM
ADDITIVES
Fraction By Weight: 1%
ACGIH TLV: 500 PPM
Hazards
Effects of Overexposure:INHALATION OF HIGH CONCENTRATION WITH CUT
VENTILATION MAY CAUSE MILD DEPRESSION.
First Aid
First Aid:REMOVE FROM EXPOSURE. CALL A PHYSICIAN. REMOVE CONTAMINATED
CLOTHES-FLUSH AFFECTED AREA WATER.
Fire Fighting
Flash Point:20F TCC
Lower Limits:1.1
Upper Limits:6.0
Extinguishing Media:CO2, FOAM, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:USE AIR SUPPLIED RESCUE EQUIP-COOL EXPOSED
Unusual Fire/Explosion Hazard:CONTAINERS
Accidental Release
Spill Release Procedures:WIPE IMMEDIATELY DISCARD AABSORBANTS SAFETY
REMOVE OPEN IGNITION. DIKE SPILLS & PUMPO TANK. KEEP VENTILATED AND
AVOID.
Handling
Handling and Storage Precautions:AVOID OPEN FLAMES-SPARKS AND EXCESSIVE
HEAT VENTILATE AREA
Exposure Controls
Respiratory Protection:RECOMMEND FACE MASK 21C-132 MINES
Ventilation:LOCAL EXHAUST: MIST DESIRABLE
Protective Gloves:RECOMMEND
Eye Protection:RECOMMEND
Other Protective Equipment:CONVENTIONAL CLOTHES FOR PAINTING
Supplemental Safety and Health
ATLAS PAINT & VARNISH CO. 3230 BUFFINGTON AVENUE, IRVINGTON, NEW JERSEY
07111
Chemical Properties
HCC:F2
Boiling Pt:B.P. Text:244-282
Vapor Pres:7.6
Vapor Density:3.9
Spec Gravity:1.33
Evaporation Rate & Reference:1.49
Solubility in Water:NEG
Appearance and Odor:PAINT OFF WHITE PAINT MINERAL SPIRIT ODOR.
Percent Volatiles by Volume:46
Stability
Stability Indicator/Materials to Avoid:YES
OXYGEN & STRONG OXIDENTS
Stability Condition to Avoid:OPEN FLAME-HIGH TEMP
Hazardous Decomposition Products:INCOMPLETE COMBUSTION PRODUCES
Disposal
Waste Disposal Methods:PROLONG OF VAPORS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.